admin@wzzt.cn
0577-86256597
What's Our Product
Recommended Products
Recommended products
Electric fluorine lining adjustment valve
Self-operated pressure regulating valve
Pneumatic diaphragm adjustment valve
Balance Cage Control Valves
Commander Operated Pressure Regulating Valves - Nitrogen Seal Valves
Pneumatic thin-film control valves
(Use: slidesPerView: 5 to display the number of spaceBetween: 20 for the spacing)
Who We Are?
About Chi Tai
公司始建于2003年
中国·志泰科技集团有限公司，注册成立于2003年，座落在东海之滨的国家级温州经济技术开发区，紧临温州龙湾国际机场，甬莞高速公路。海、陆、空立体交通十分便利，地理环境优越。
公司注册资金
公司占地面积
专业技术人员
专业生产线
Solution
Solution
Oil
urban sewage treatment
Natural gas
View the details>>
Electricity
Polysilicon
Authoritative certification
Zhitai-Authoritative Certification
INFORMATION
News
2019-03-14
How to extend the use cycle and stability of pneumatic ball valves
Pneumatic ball valves in industrial applications is a widely used type of general-purpose valves, the use of large quantities, consumption is also fast, the need for regular and reasonable maintenance and repair, so that the efficiency can be improved, the cost can be saved, and reduce the time of maintenance. How to make the pneumatic ball valve longer service life, stable performance, the following points need to pay attention to the factors: 1, before using the pneumatic valve debris and iron filings with water for cleaning. 2, pneumatic valve in the closed state, the valve will also have some residual media, to cut off the power supply and gas source and then clean up, the pressure in the valve body to be completely released. 3, the valve will generally use sealing materials to prevent leakage and wear, the need for regular cleaning of sealing materials into. 4, flange nuts and bolts should be fixed tight, in order to prevent uneven acceptance between the flange surface leads to gasket damage or rupture, resulting in the valve flange docking out of the media leakage. 5, if the valve is a long-term open-air work will lead to the valve and parts of the rust may make the valve can not be used normally, so the need for maintenance and testing, in order to ensure the stable operation of the performance.
Learn more
Talk to an experienced consultant to find out how
